The finished press (exc. Mold, pusher and linseed oil finish). The legs and vertical poles are galvanized, the drip tray is a simple cake pan. Dumbbell weights will be used to push down on the top board.
After some cool results with our other dairy products I think we are nearly ready to give hard cheeses a go, but before we get stuck in we are going to need some sort of press. After all, by draining the whey and pressing the curds we can achieve a hard, moisture free cheese that will safely age at temperatures which would usually spoil soft cheeses and other dairy products.
You could get away with a makeshift press but I’m going to show you another way. The design here is based on a few presses that I found while browsing the web but I have added and changed a couple of things. One important thing to consider when thinking materials is that the bottom and top board must be able to withstand and accommodate 25kg (50lbs) of weight. This is usually the most weight that will be used during pressing.
The cost involved in building a press can be next to nothing to very expensive indeed, depending on the materials used and how nice you want it to look. As soon as I realized that I was going to need a press I thought about what I could use that was already available to me. I knew that there was plenty of nice old timber at the farm and a cake pan at home, as well as some old dumbbell weights that could come in handy later. I did need to buy the gal legs and uprights ($5.00 each) but you could get away with timber dowel uprights beveled into the based (no legs) if you wanted to do it cheap.
Here are some photos, which will hopefully help to explain the process.
Drilling 22cm holes 3cm in from each corner. Be sure to attach a bottom board and drill into NOT through this extra board, this will ensure that the underside of your timber doesn't split. You will need 2 boards 400 x 250mm or larger for the press.
The top board can be used as a guide to mark the holes for the bottom board. Note: the top board needs 25mm wide holes to accommodate free movement when sliding on the 21mm gal poles, the bottom board only needs 22mm holes. The gal feet are high enough to ensure that the timber doesn't get wet + a pan can be placed under the whey drip tray.
Making a traditional timber finish is as simple as boiling some raw linseed oil. The Boiled linseed found in hardware stores usually contains chemical drying agents, which I don't really want on my cheese press. Boiling raw linseed somehow allows it to dry faster once cooled and applied. The old saying for oil application goes "Apply once a day for a week, once a week for a month, once a month for a year and once a year forever". Note: this timber finish is not a waterproofing treatment but hopefully with the drip pan in place I wont be getting the timber wet anyway.
The timber I used and was lucky enough to have available to me is Australian Red Cedar (Toona ciliata var. australis). It is one of the rarest and finest furniture timbers in Australia, with much of it logged in the pioneer days. This press is particularly special to me because of this and the colour and smell of the timber is just magnificent.
If you have any questions or suggestions on any of my blog posts by all means throw me a message. One more thing, does anyone have any experience with setting up a cheese fridge or something similar for aging hard cheeses?